Cross Colors Solids
Cross Colors Porcelain Stone tiles are available in a wide range of colors to suit the needs of architects, designers, and builders. These tiles are durable and meet the needs of any commercial installation. Cross Colors Solid tiles are made in 3 sizes and two finishes. The Unpolished (UPS) finish has a subtle glow, resists stains, and scuff marks are easily wiped off. This finish is great for interior walls and floors of high traffic areas. The Unpolished finish should not be used on exterior horizontal surfaces. The Polished finish is an ideal alternative to natural stone. This finish is recommended for most interior floors and walls and adds a bit of elegance. The Polished finish is NOT recommended for wet areas or exterior paving.
Sizes & Trim
6" x 6" cut & beveled
8" x 8" (A & C colors only)
12" x 12"
6" x 8" cove base & corners*
1" x 6" in & out corners*
4" x 8" bullnose & corners^
4" x 8 stair tread*
*Only available in A Series Unpolished colors
^4" x 8" corners NOT available in B Series colors
- Thickness: 5/16"
- Shade Variation: V1
- Water Absorption: < 0.10%
- Breaking Strength: 350 - 420 lbf
- DCOF: Unpolished (UPS) 0.50 – 0.60 Polished (PO) 0.31 – 0.41
- MOH: 5 unpolished6 polished
- Suggested Grout Joint: See TCNA article ANSI A108.02 Section 4.3.8
- Available Finishes: unpolished & polished
- Type: Porcelain
Care & Maintenance
Amethyst Antico Taupe Bamboo Bayberry Doeskin Ebony Empress White Featherstone Forest Green Greige Patino Lapis Maple Sugar Oceana Peach Fresco Platinum Primavera Seabreeze Seal Taupe Sunflower Terra Rosata Windsurf Zeolite
No accents available for this product.